daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

NHTSA99V336001 > < Recall - Wheel Bolt Torque Inspection
Page 2
background image

3.

Raise the hood and place a punch mark in the bulkhead approximately 1/4 inch to the right of the VIN in the engine compartment as shown.

4.

Close the hood and insure that it is properly secured.

5.

Locate the vehicle Owner's Manual and apply the correct publication revision label(s) that correspond to the model year of the vehicle.

Parts Information

Warranty Claim Information

NHTSA99V336001 > < Recall - Wheel Bolt Torque Inspection