Lanos S Hatchback L4-16L DOHC D-TEC MFI (1999) Alternator Removal and Installation
15. Pry off the baffle.
16. Remove the rectifier/regulator/brush holder assembly screws.
17. Remove the brush holder assembly and the regulator, cutting the terminal between the regulator and the rectifier bridge.
IMPORTANT: If the brush can be reused, reassemble the brush to the holder with the retaining pin, after cleaning the brush with a soft, clean
cloth.
18. Test the rectifier bridge by connecting the ohmmeter terminals to the bridge and the heat sink
19. Retest by connecting the ohmmeter terminals in reverse.