Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Installation Procedure
1. Install the ignition switch with the ignition switch retaining screw.
Tighten
Tighten the ignition switch retaining screw to 2 Nm (18 inch lbs.).
2. Connect the wiring to the ignition switch.
3. Install the lock cylinder.
4. Install the lower steering column cover panel with the screws.
Tighten
Tighten the lower steering column cover panel screws to 3 Nm (27 inch lbs.).
5. Connect the negative battery cable.
