Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
5. Remove the adjuster plug, the adjuster spring and the rack bearing with the O-ring seal attached.
6. With the rack gear centered, mark the location of the stub shaft notch on the housing to aid in the proper installation of the pinion and valve
assembly.
7. Remove the pinion shaft seal by pressing down on one side of the seal and pulling up on the other side of the seal.
8. Remove the retaining ring and pull the pinion and valve assembly out of the rack and pinion housing.
9. Remove the housing end cover.