Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Slide the boot onto the housing.
2. Install the boot retaining bushing onto the housing. Lightly coat the boot retaining bushing with multi-purpose grease for ease of assembly.
3. Slide the boot onto the boot retaining bushing and seat the boot into the housing groove at the pinion end of housing.
4. Crimp the new boot clamps using the installer KM-J-22610.
5. Install the mounting bracket bushing onto the housing.
6. Connect the hydraulic cylinder lines.
7. Install the rack and pinion steering assembly into the vehicle.
Rack and Pinion Boot Disassembly and Reassembly-Manual
RACK AND PINION BOOT
-
Tools Required
-
KM-J-22610 Installer
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the mounting bracket bushing.
