Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
2. Install the stabilizer shaft clamp insulators, the stabilizer shaft clamps, and the stabilizer shaft-to-body clamp bolts. Do not tighten the bolts.
3. Connect the stabilizer shaft to the lower control arm with the stabilizer shaft link assembly.
4. Make certain the stabilizer shaft is centered side-to-side.
Tighten
Tighten the stabilizer shaft-to-body clamp bolt to 40 Nm (30 ft. lbs.).
5. Connect the stabilizer shaft to the control arm with a new self-locking nut.
6. Tighten the self-locking nut to achieve 38 mm (1.5 inch) between the self-locking nut and the control arm spacer.
7. Install the wheel.
8. Lower the vehicle.
