Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
3. Install a new large seal retaining clamp and a new small seal retaining clamp.
4. Crimp the new small seal retaining clamp and the new large seal retaining clamp using the seal clamp pliers J-35566.
5. Install the cross groove joint seal assembly.
CROSS GROOVE JOINT SEAL
Tools Required
J-35566 Seal Clamp Pliers
J-8059 Snap Ring Pliers
Removal Procedure
1. Remove the large seal retaining clamp. Discard the clamp.
2. Remove the small seal retaining clamp. Discard the clamp.
3. Degrease the joint.