Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Constant Velocity Joint: Service and Repair
With Automatic Transaxle
OUTER JOINT SEAL
Tools Required
J-8059 Snap Ring Pliers
Removal Procedure
1. Remove the inner tripot seal assembly.
2. Remove the large seal retaining clamp. Discard the clamp.
3. Remove the small seal retaining clamp. Discard the clamp.
4. Degrease the joint.
Caution: Do not remove the axle shaft from the outer joint assembly or disassemble the outer joint assembly. Parts are match fit and cannot
be serviced separately. Improper reassembly will adversely affect both performance and safety.
5. Remove the seal from the joint assembly.
Installation Procedure
Tools Required
J-35566 Seal Clamp Pliers
1. Install the seal onto the axle shaft.
2. Fill the joint seal with 75 to 95 g (2.6 to 3.4 ounces) of the recommended grease. Repack the joint with 75 to 95 g (2.6 to 3.4 ounces) of the
recommended grease.
