Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
4. Install the shaft retaining ring using the snap ring pliers J-8059.
5. Fill the joint assembly with 120 to 140 g (4.2 to 4.9 ounces) of the recommended grease. Repack the joint seal with 120 to 140 g (4.2 to 4.9
ounces) of the recommended grease.
6. Install a new large seal retaining clamp.
7. Crimp the new large seal retaining clamp using the seal clamp pliers J-35566.
8. Crimp the new small retaining clamp using the seal clamp pliers J-35566.
