Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
9. Install the control shift rod.
10. Press the ball sockets onto the ball studs on the linkage bolts.
11. Connect the plastic clips on the end of each ball socket.
12. Connect the linkage bolt to the shift tube.
13. Adjust the shift linkage. Refer to Shift Linkage,M/T; Adjustments.
14. Install the rod clamp bolt.
Tighten
Tighten the rod clamp bolt to 14 Nm (124 inch lbs.).
15. Connect the negative battery cable.
