Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Notice: After the bleeding operation, the brake reservoir may be pressurized. While disconnecting the bleeder hose or the unthreaded adapter cap,
cover the cap and the connection with a shop towel to protect painted surfaces from contact with the brake fluid.
10. Inspect the brake pedal for sponginess. Repeat the entire bleeding procedure to correct this condition.
MANUAL BLEEDING THE BRAKES
1. Remove the booster reserve by applying the brakes several times with the engine OFF until all the reserve is depleted.
Important: If the master cylinder is known or suspected to have air in the bore, then it must be bled before any wheel cylinder or caliper is bled.
2. Fill the master cylinder reservoir with brake fluid. Keep the master cylinder at least one-half full of fluid during the bleeding operation.
