Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
8. Install the parking brake cable to the underbody side brackets on each side of the vehicle, and a bracket near the underbody side bracket
(passenger side only).
-
Tighten the parking brake cable-to-underbody side and near side bracket nuts to 12 Nm (106 inch lbs.).
9. Install the parking brake cable on the rear axle brackets on each side of the vehicle.
-
Tighten the parking brake cable-to-rear axle bracket nut to 12 Nm (106 inch lbs.).
10. Insert the parking brake cables through the welded body bracket.
11. To install the equalizer, the front muffler, and the heat shield.
12. If the parking brake shoe lever was pressed backward before removing the brake drum, press it forward and adjust the parking brake.