Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Drive Belt: Service and Repair
PUMP DRIVE BELT
-
Tools Required
-
J-23600-B Belt Tension Gauge
Checking Belt Tension
1. Using belt tension gauge J-23600-B, check the tension on the pump drive belt.
2. If bed tension gauge J-23600-B does not indicate the proper tension, adjust the belt.
Adjusting Belt Tension
1. With belt tension gauge J-23600-B on the pump drive belt, loosen the alternator adjusting bolt and move the alternator until the gauge indicates
the proper tension.
2. Tighten the alternator adjusting bolt.
Tighten the alternator adjusting bolt to 20 Nm (15 ft. lbs.)
