Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Power Steering Pump: Service and Repair
DOHC Pump Drive Pulley
DOHC PUMP DRIVE PULLEY
-
Tools Required
-
J-28467-B Engine Support Fixture
Removal Procedure
1. Remove the air cleaner housing by removing the housing bobs and loosening the clamp.
2. Loosen the steering pump pulley bolts.
3. Remove the pump drive belt from the pulley by loosening the alternator adjusting bolt and pulling it forward.
4. Install the engine support fixture J-28467-B. Support the engine.
