Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
2. Remove the mounting bracket bushing.
3. Cut off the rack and pinion boot clamps. Remove the rack and pinion boot.
4. Replace the boot retaining bushing if it is damaged.
5. Replace the housing end cover only if it is damaged.
Assembly Procedure
1. Slide the new boot clamp onto the boot. Slide the boot onto the housing.
2. Install the boot retaining bushing into the boot. Lightly coat the inner lip of the boot retaining bushing with multipurpose grease for ease of
assembly.
3. Slide the boot and the boot retaining bushing until they are seated in the bushing groove at the pinion end of housing.
4. Crimp the new boot clamps using the installer KM-J-26610.
5. Install the mounting bracket bushing.
6. Install the rack and pinion steering assembly into the vehicle.
Coupling Assembly
COUPLING ASSEMBLY
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.