Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
4. Remove the roller bearing using a press and a suitable drift.
Assembly Procedure
Important: Make sure the bearing is fully bottomed in the housing.
1. Install the roller bearing using a press and a suitable drift.
2. Install the pinion shaft assembly.
3. Install the rack bearing assembly.
4. Install the rack and pinion steering assembly from the vehicle.
Disassembly and Reassembly Rack Bushing
RACK BUSHING
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the rack bearing assembly.
3. Remove the pinion shaft assembly.
4. Remove the rack shaft.
5. Remove the rack housing retaining ring with extended snap ring pliers.
