Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Install the roller bearing using a press and a suitable drift.
2. Install the pinion shaft assembly.
3. Install the rack bearing assembly.
4. Install the rack and pinion steering assembly from the vehicle.
Disassembly and Reassembly Rack Bushing-Manual
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the rack bearing assembly.
3. Remove the pinion shaft assembly.
4. Remove the rack shaft.
5. Remove the rack housing retaining ring with extended snap ring pliers.
6. Remove the rack bushing using a slide hammer and a suitable attachment.
Assembly Procedure