Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Install the new rack bushing using a drift and an appropriate socket. Press the bushing into the housing by placing the socket on top of it and
applying pressure with a drift and a press.
2. Install the rack housing retaining ring.
3. Install the rack shaft.
4. Install the pinion shaft assembly.
5. Install the rack bearing assembly.
6. Install the rack and pinion steering assembly into the vehicle.
Steering Gear Cylinder Pipes
Steering Gear Cylinder Pipes
Removal Procedure
1. Siphon the power steering fluid from the fluid reservoir.
2. Disconnect and remove the steering gear cylinder pipes at the rack and pinion housing. Remove the 0-ring seals from the housing.
Installation Procedure
1. Install new 0-rings onto the cylinder pipes. Install the steering gear cylinder pipes into the rack and pinion housing.