Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Passenger Assist Handle: Service and Repair
Removal Procedure
1. Reposition the plastic caps to reveal the assist handle screws.
2. Remove the screws and the assist handle from the headliner.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the assist handle to the headliner with the screws.
Tighten
Tighten the passenger assist handle screws to 3 Nm (27 lb.in).
2. Install the plastic caps over the assist handle screws.
