Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
2. Place the brake pedal and the return spring in the brake pedal bracket, and install the shaft, the washer, and the nut.
Tighten
Tighten the shaft nut to 18 Nm (13 ft. lbs.).
3. Install the retaining clip into the hole in the pedal shaft.
4. Align the clevis with the holes in the brake pedal, and install the clevis pin, the clevis retainer, and the clip.
5. Install the stoplamp switch.