Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Brake Rotor/Disc: Service and Repair
Front Rotor
Removal Procedure
1. Remove the caliper.
2. Remove the brake pads.
3. Remove the caliper mounting bracket.
4. Remove the rotor detent screw.
5. Remove the rotor.
Installation Procedure
Important: To guarantee uniform braking, always refinish both rotors even if only one rotor is defective. If a rotor is being replaced, use a new rotor
on both sides of the vehicle.