Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install the rotor on the front wheel hub and install the detent screw.
Tighten
Tighten the rotor detent screw to 4 Nm (35 inch lbs.).
2. Apply a few drops of thread-locking compound to the bolts and install the caliper bracket.
Tighten
Tighten the caliper bracket-to-steering knuckle mounting bolts to 95 Nm (70 ft. lbs.).
3. Install the brake pads and the caliper.