Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
14. Install the parking brake shoe engaging the shoe tips in both the adjusting screw and the tappet slots.
15. Install the wheel hub assembly, and secure it with the wheel hub assembly-to-spindle shaft castle nut.
Tighten
Tighten the wheel hub assembly-to-spindle shaft castle nut to 25 Nm (18 ft. lbs.), plus 1 Nm (9 inch lbs.).
16. Install the shaft dust cover.
17. Install the parking brake cable to the parking brake lever on each side of the vehicle.
18. Adjust the parking brake.
19. Install the rotor.