Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Brake Rotor/Disc: Service and Repair
Rear Rotor
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the rear wheels relative to the wheel hubs and remove the wheels.
NOTICE: To prevent damage to the brake hose, do not hang the caliper from the brake hose.
3. Remove the caliper.
4. Remove the caliper bracket.
5. Remove the rotor detent screw.
6. Remove the rotor.
Installation Procedure
1. Inspect the rotor.
