Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
2. Install the rotor with the detent screw.
Tighten
Tighten the rotor detent screw to 4 Nm (35 inch lbs.).
3. Install the caliper bracket.
Tighten
Tighten the caliper bracket mounting bolts to 56 Nm (41 ft. lbs.).
3. Install the caliper.
4. Align the match marks that were made before removal, and install the rear wheels.
5. Lower the vehicle.