Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
6. Remove the bolts and the washers which secure the parking brake assembly to the underbody.
7. If necessary, remove the parking brake switch attached to the parking brake lever assembly by a small screw, and remove the switch.
Installation Procedure
NOTICE: If the parking brake lever is bent or damaged, replace the entire parking brake lever assembly.
1. Fasten the parking brake switch to the parking brake lever assembly with the screw.
Tighten
Tighten the parking brake switch-to-parking brake lever screw to 4 Nm (35 inch lbs.).
