Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
10. Connect the new parking brake adjustment screw to the new adjustment nut. Tighten the nut to where it meets the screw, and then back off
one-quarter of a turn.
11. Install the adjustment screw and the adjustment nut into the backing plate actuation mechanism on the adjustment pawl side. Keep the shoe slot
parallel with the backing plate face.
12. Install the new pushrod into the tappet. Ensure the pushrod is set correctly in the lever socket by holding the lever into the backing plate while
inserting the pushrod and the tappet.
13. Clean excess grease using a clean rag.
Important: The shoe assembly must be resting on the splash shield with the brand side up.
Important: Clean hands are required when handling the parking brake shoe.