Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
5. If the adjuster spring is not fully compressed, press the cable release button and slide the cable into the adjuster until the spring is fully
compressed.
NOTE: When the adjuster button is pressed, do not allow the adjuster spring to expand to a length of more than 2 cm (3/4 inch) or the adjuster
rack will come out of the adjuster, and will have to be re-inserted. To keep the adjuster in one piece during adjustment, hold the cable when the
adjuster button is pressed.
6. Insert the cable adjuster into the adjuster bracket.
7. Press the cable release button and adjust the cable to achieve a gap of 0.5 mm (0.02 inches) between the bushing and the nipple of the cable ball.
8. Install the knee bolster.
9. Install the knee bolster trim panel.
