Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Exhaust Manifold: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the pre-converter oxygen sensor connector.
3. Remove the exhaust manifold heat shield bolts.
4. Remove the exhaust manifold heat shield.
5. Remove the auxiliary catalytic converter upper flange nuts from the exhaust manifold.
6. Remove the exhaust manifold retaining nuts in the sequence shown.
7. Remove the exhaust manifold.
8. Remove the exhaust manifold gasket.
9. Clean the sealing surfaces of the exhaust manifold and the cylinder head.