Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Control Assembly: Service and Repair
Control Assembly, HVAC
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the audio system trim plate.
3. Remove the four controller retaining screws.
4. Pull out the controller to provide clearance for the removal of the temperature control cable.
5. Disconnect the temperature control cable by gently prying the cable eyelet from the post on the controller. Unsnap the cable housing from the
mechanical slide. Note the location of the cable and the housing for ease of installation.
6. Disconnect the electrical connectors.
7. Remove the vacuum hose connection block from the mode control switch.
Installation Procedure
