Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
6. Insert the terminals into connector J1 as they had been removed:
-
Right side -terminals B3 (BRN) and A4 (DK GRN).
-
Left side - terminals B4 (YEL) and A5 (LT BLU).
7. Connect EBCM connector J1.
8. Replace the EBCM into its mounting. Refer to "Electronic Brake Control Module (EBCM)".
9. Connect the negative battery cable.
