Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Clean all of the starter motor parts. Do not use grease-dissolving solvents for cleaning the armature and the field coils.
2. Lubricate the gears with lubricant. (Begin at Step 7 if proceeding with just the reassembly of the solenoid.)
3. If full disassembly of the starter and the solenoid was performed, begin reassembly by placing the gear sup- port on the driveshaft assembly.
4. Install the drive and the pinion stop on the driveshaft.
5. Install the lock ring into the groove on the driveshaft and insert the collar.
6. Install the needle bearing.