Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Tighten
Tighten the power steering pump lower bolt to 20 Nm (15 ft. lbs.).
9. Install the rubber supply hose to the metal supply pipe.
10. Install the engine under cover.
11. Lower the vehicle.
12. Install the serpentine belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt
13. Connect the high-pressure hose to the power steering pump.
Tighten
Tighten the high-pressure hose fitting to 28 Nm (21 ft. lbs.).
14. Install the coolant hose to the thermostat housing.