Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Install the upper bolt to the pump bracket.
Tighten
Tighten the power steering pump upper bolt to 20 Nm (15 ft. lbs.).
5. Swing the upper bracket link to its original position.
6. Install the bolt to the rear hole of the upper bracket link.
Tighten
Tighten the rear power steering upper bracket link bolt to 25 Nm (18 ft. lbs.).
Tighten
Tighten the front power steering upper bracket link bolt (not removed) to 25 Nm (18 ft. lbs.).
7. Raise and suitably support the vehicle.
8. Install the lower bolt to the pump bracket.