Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
9. Counterhold the pinion-side inner tie rod and remove the cylinder-side inner tie rod.
10. Place a rag over the rack, counterhold the rack assembly on the teeth with a wrench, and remove the pinion-side inner tie rod.
IMPORTANT: The retaining ring can be released by inserting a small screwdriver through the hole in the side of the housing.
11. Remove the bulkhead inner cylinder retaining ring the bulkhead inner cylinder and the rack.
Assembly Procedure
NOTICE: Coat all the seals with power steering fluid to ensure proper sealing.