Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
11. Remove the front crossmember-to-body bolts.
12. Remove the crossmember assembly from the vehicle.
Installation Procedure
1. Install the crossmember assembly.
2. Install the crossmember support plates.
3. Install the rear crossmember-to-body bolts.
Tighten
Tighten the rear crossmember-to-body bolts to 196 Nm (145 ft. lbs.).
Tighten
Tighten the crossmember support plate-to-body bolts.
4. Install the front crossmember-to-body bolts.
Tighten
Tighten the front crossmember-to-body bolts to 47 Nm (35 ft. lbs.).