Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
5. Install the crossmember link-to-transaxle bracket nut.
Tighten
Tighten the crossmember link-to-transaxle bracket nut to 169 Nm (1125 ft. lbs.).
6. Connect the stabilizer link to the strut assembly.
7. Connect the ball joint to the knuckle assembly.
8. Connect the be rod from the knuckle assembly.
9. Install the exhaust pipe into the vehicle.
10. Install the wheels.
11. Lower the vehicle.
