Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
2. Install the steering knuckle-to-strut assembly nuts.
Tighten
Tighten the steering knuckle-to-strut assembly nuts to 100 Nm (74 ft. lbs.).
3. Connect the drive axle to the front wheel hub.
4. Connect the ball joint to the knuckle assembly.
5. Install the ball joint pinch bolt and the nut.
Tighten
Tighten the ball joint pinch bolt nut to 60 Nm (44 ft. lbs.)