Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
6. Connect the ABS speed sensor electrical connection.
7. Connect the outer tie rod to the knuckle assembly.
8. Install the brake caliper onto the rotor.
9. Install the caulking nut onto the axle shaft.
Tighten
Tighten the drive axle-to-hub caulking nut to 150 Nm (111 ft. lbs.). Loosen the nut, then retighten it to 50 Nm (37 ft. lbs.) plus 60 degrees.
10. Install the wheel.
11. Lower the vehicle.