Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Remove the knuckle assembly from the vehicle.
2. Remove the Brake Rotor.
3. Remove the hub and bearing assembly. Refer to Wheel Hub.
4. Remove the brake splash shield.
Assembly Procedure
1. Install the brake splash shield.
2. Install the hub and bearing assembly.
3. Install the rotor.
4. Install the knuckle assembly onto the vehicle.
