Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Fluid Line/Hose: Service and Repair
Removal Procedure
Important: Place a drip pan under the hoses to catch the fluid that will run out of the lines.
1. Loosen the hose clamps and disconnect the hoses from the transaxle.
2. Remove the oil cooler pipe bracket bolt and disconnect the oil cooler pipe from the upper end of the radiator. Remove the oil cooler pipe and hose
from the vehicle.
3. Loosen the hose clamp at the lower end of the radiator and remove the cooler hose from the vehicle.
Installation Procedure