Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install the cooler hose onto the lower end of the radiator and tighten the hose clamp.
2. Install the cooler pipe and hose onto the upper end of the radiator.
Tighten
Tighten the oil cooler pipe bolt to 22 Nm (16 ft. lbs.).
Tighten the oil cooler pipe bracket bolt to 25 Nm (18 ft. lbs.).
3. Install the hoses onto the transaxle.
4. Tighten the transaxle hose clamps.
5. Refill the transaxle fluid.
