Charade L3-0993cc 1.0L (1988)
Timing Belt: Service and Repair
Installation
1.
Installation of camshaft timing belt pulley.
(a) Assemble the camshaft timing belt pulley by aligning its key groove with the woodruff key of the camshaft.
NOTE:
-
Remove any oil or water from the camshaft timing belt pulley. Keep the pulley clean.
-
If the camshaft timing belt pulley can not be inserted by hand, for easier insertion, lightly tap it from the front using a plastic hammer.
During the installation, care must be exercised to ensure that the woodruff key is not displaced.
(b) Tighten the attaching bolt of the camshaft timing belt pulley.
During this operation, prevent the pulley rotation by inserting an iron rod into the hole of the pulley, utilizing the rib at the cylinder head side.
Tightening Torque:
3.0 - 4.5 kg-m (21.7 - 32.5 ft-lb, 29.4 - 44.1 Nm)
Crank Pulley
2.
Installation of crankshaft timing belt pulley flange. Install the crankshaft timing belt pulley flange with its recessed side facing toward the cylinder
block.
NOTE: Remove any oil or water from the pulley flange. Keep the pulley flange clean.
