Charade L3-0993cc 1.0L (1988)
Crank Pulley
3.
Installation of crankshaft timing belt pulley.
Assemble the crankshaft timing belt pulley by aligning its key groove with the woodruff key of the crankshaft.
NOTE: Remove any oil or water from the idler pulley. Keep the idler pulley clean.
Tensioner Spring And Idler
4.
Installation of idler pulley and return spring.
(a) Temporarily install the timing belt idler pulley with the mount bolt.
(b) Install the tension spring.
(c) With the idler pulley fully pushed to the left, temporarily tighten it.
NOTE: Remove any oil or water from the idler pulley. Keep the idler pulley clean.
5.
Timing belt installation.
(a) Ensure that the mating mark of the crankshaft timing belt pulley is aligned with the mating mark on the cylinder head.
^
If the timing marks are not aligned with each other, align them.
However, keep rotation of the timing belt pulley at a minimum so that the piston may not interfere with the valve.
