dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Exhaust Flex Joint - Squeak/Chirp Noise|Page 1744 > < Exhaust Flex Joint - Chirp/Squeak
Page 1
background image

Exhaust Pipe: All Technical Service Bulletins
Exhaust Flex Joint - Squeak/Chirp Noise

Models

1983 Front Wheel Drive Vehicles With 2.6L, 2.2L & 1.7L Engines - Federal & California Emission Systems, Automatic & Manual Transmissions

Subject

Exhaust Flex Joint Squeak

Index

EXHAUST

Date October 24, 1983

No.

11-02-83

P-4152-C
SYMPTOM/CONDITION

This condition emits a "chirp" or "squeak" sound from the exhaust seal ring-to-exhaust manifold connection. This noise is heard most often when the
automatic transmission is placed in gear or a manual transmission equipped car is driven in reverse.

PARTS REQUIRED

Loctite high temperature nickel anti-seize compound #77164 or equivalent.

REPAIR PROCEDURE

1.

Remove two bolts holding exhaust flex joint to exhaust manifold.

FIGURE 1

2.. Remove exhaust seal ring (Figure 1).

Exhaust Flex Joint - Squeak/Chirp Noise|Page 1744 > < Exhaust Flex Joint - Chirp/Squeak