B150 1/2 Ton Van V8-318 5.2L (1985)
![background image](/dodge/b150_1/2_ton_van/v8-318_5.2l/Page-934015.png)
FIGURE 3-F - BODY WIRING
NOTE:
HARNESS SHOULD BE TIGHT IN THIS AREA THE WRAP IN FOUR
(4)
PLACES (FIGURE 3-E).
3.
At engine compartment, route harness through existing speedometer cable clips to bulkhead connector. If excess wiring exists; loop, tie wrap (2),
and install into existing clip (Figure 3-F).