Caliber L4-2.4L (2009)
Rear Fender Liner: Service and Repair
Splash Shield - Installation
INSTALLATION
NOTE: Left hand side has 2 additional push pins as it has additional material to cover the fuel filler tube.
1. Place splash shield (1) up to wheel house (5) and align splash shield holes with fender.
2. Install fasteners (4).
3. Install push pins (2) and (3).
4. Install the rear wheels. See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
