Caliber L4-2.4L (2009)
5. Remove the engine roll mount (3) through bolt (2) and remove the fore/aft crossmember (4).
Front Suspension
REMOVAL
1. Raise and support the vehicle, See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove the four wheel well screws.
3. If equipped, remove the three front screws (4), the three rear screws (2) and one push pin fastener from the center of the belly pan.
4. Remove the rear roll mount (4) through bolt (2).
5. Remove the three bolts (3) attaching the rear roll mount (5) to the crossmember and remove the mount.
