Caliber L4-2.4L (2009)
Sun Shade: Service and Repair
Sunroof Sunshade - Installation
INSTALLATION
1. Verify the sunshade track is free of obstructions like the trim lace/ring.
2. Start with sunshade (2) at an angle with one foot (1) in the track.
3. Rotate the sunshade so the other rear foot is in the track as well as the 2 other feet (3) on the same side as the first foot.
4. To insert the remaining two feet (2) apply force to the middle front of sunshade (3) and guide them into the track.
5. Check that all the feet are in the right track and verify sunshade operation.
6. Install the drain trough, See: Sunroof / Moonroof Track/Service and Repair/Sunroof Trough - Installation
