Caliber L4-2.4L (2009)
Seat Cover: Service and Repair
Seat Cushion Cover - Removal
Front
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Move the seat to the forward position and disconnect and isolate the negative battery cable.
3. Remove the bolts (2) and the straps (1).
4. Disconnect the electrical connector, if equipped.
5. Lift the front of the seat cushion (2) up and slide out from under the seat back cushion (1).
Rear
REMOVAL
